TIC2401代写、代做Computer Systems、Python，Java，c++编程代写

日期：2020-03-12 10:37

AY2018/19 Semester 2 - 1 of 5 - TIC2401 Lab Assignment

TIC2401 Introduction to Computer Systems

Lab Assignment 1

(Due 8th March 23:59)

Name: ________________________________ Student No.: ____________________

SUBMISSION: Zip this document together with the TWO .asm files (task1.asm &

arrayCount.asm). Rename the file in the format: “Lab_Assignment1_Axxxxxxxx.zip”

and upload to the LumiNUS Submission folder. Please note that Axxxxxxx is your student

number that starts with the letter ‘A’.

Objective

This document and its associated files (messages.asm and arrayCount.asm) can be

downloaded from LumiNUS.

Reading and Writing Message to Console Window: messages.asm

To request a service, a program loads the system call code into register $v0 and arguments

into registers $a0 – $a3 (see Figure A.9.1 below). System calls that return values put their

results in register $v0. For this lab, we are interested in only the following system calls:

print_string, print_int, read_int and exit.

AY2018/19 Semester 2 - 2 of 5 - TIC2401 Lab Assignment

For example, the following code in messages.asm prints “the answer = 5”.

# messages.asm

.data

str: .asciiz "the answer = "

.text

main:

li $v0, 4 # system call code for print_string

la $a0, str # address of string to print

syscall # print the string

li $v0, 1 # system call code for print_int

li $a0, 5 # integer to print

syscall # print the integer

li $v0, 10 # system call code for exit

syscall # terminate program

The print_string system call (system call code 4) is passed a pointer (memory address)

to a null-terminated string, which it writes to the console. The print_int system call

(system call code 1) is passed an integer and it prints the integer on the console. The exit

system call (system call code 10) indicates the end of the program.

The li (load immediate) and la (load address) are pseudo-instructions (refer to Lab #3).

Run the above program to verify your understanding.

Task 1: Modify messages.asm [2 marks]

Modify messages.asm and call the new program task1.asm. The modified program

should read the value to be printed from the console before printing the value. The system call

read_int reads an entire line of input up to and including the newline. Characters following

the number are ignored. Note that read_int modifies the register $v0 (where you put the

code for system call) as it returns the integer value in register $v0.

The following screen capture shows a run of the program. The first line is your input, and the

second line is the output of your program.

Ensure that your new program is working as expected before proceeding.

AY2018/19 Semester 2 - 3 of 5 - TIC2401 Lab Assignment

Task 2: Getting Real (arrayCount.asm) [18 marks]

When we discuss MIPS code in the lecture, it is common to see the “variable mappings” list.

The list indicates how certain program variables are “mapped” to their respective registers. In

this task, we are going to actually perform these mappings.

First, let us learn about allocating memory space for variables in a program. The assembler

directive ".data" allows us to reserve memory space in the data segment. These reserved

locations are used to store the values of various program variables during program execution.

Key idea: Values of program variables are stored in the memory. We load them into

registers (perform a mapping) only when we want to manipulate or access them during

execution.

This is because register is a fast storage in the processor, while memory is a much slower

storage outside the processor. As the access speed is not simulated in the QtSpim, the

separation and mapping between memory and register may seem strange to you. In real

processor, the difference in access speed of register versus memory can be much more than 10

times!

The problem statement now reads:

Count the number of multiples of X in a given array of 8 non-negative numbers,

where X is a user chosen power-of-two value, e.g. 1, 2, 4, 8, ….

Download arrayCount.asm from LumiNUS. The initial content of the file is:

# arrayCount.asm

.data

arrayA: .word 1, 0, 2, 0, 3 # arrayA has 5 values

count: .word 999 # dummy value

.text

main:

# code to setup the variable mappings

add $zero, $zero, $zero # dummy instructions, can be removed

…………

# code for reading in the user value X

# code for counting multiples of X in arrayA

# code for printing result

# code for terminating the program

li $v0, 10

syscall

The main routine contains several dummy instructions (instructions with no real effect) so that

you can step through the program to observe the content in the data segment.

AY2018/19 Semester 2 - 4 of 5 - TIC2401 Lab Assignment

Where is the array arrayA located in the data segment? Give the base address (starting

address) of the array:

arrayA is at 0x______________________

Where is the program variable count in the data segment?

count is at 0x_______________________

(Hint: Don’t forget that 999 is in decimal…)

The given code only allocates 5 elements for arrayA. Enlarge the array to size 8. You can

place any valid integer values for the new locations. Fill in the assembler directive below:

arrayA: ____________________________________

Now, let us perform the following mappings:

Base address of arrayA  $t0 (similar to notation used in lectures)

count  $t8

You may use the "la" (load address) instruction here to help. Give the instruction sequence

(which may consist of 1 or 2 instructions) below:

To map arrayA: _____________________

_____________________

To map count : _____________________

_____________________

We are almost ready to tackle the task. One last obstacle is to figure out how to check for

“Multiples of X, where X is a power-of-two”. Recall that in Tutorial #2, we learned that

“andi” instruction can be used to find the remainder of division by 16. For the following

questions, give the correct mask for the andi instruction to compute “$t4 = $t3 % X”.

If X is 32, andi $t4, $t3, 0x______

If X is 8, andi $t4, $t3, 0x______

Observe that we can easily generate the mask from X. If X is stored in register $t8, complete

the following instruction to generate the mask in register $t5. (Hint: look at the mask as a

number).

______ $t5, $t8, ______ (fill in the operation and the last operand)

AY2018/19 Semester 2 - 5 of 5 - TIC2401 Lab Assignment

We are now ready to finish off the task. Write the necessary code to:

a. Read user input value, X. You can assume X is always a power-of-two integer, i.e.

there is no need to check for invalid user input.

b. Count the number of multiples of X in arrayA and print the result on screen.

You should use loop wherever appropriate, or full credit will not be given. Sample code can

be found in Lecture <MIPS Part 2> (slides 32-34). Here’s a sample output screenshot for a

predefined array {11, 0, 31, 22, 9, 17, 6, 9} and user input of X = 2. The

output is 3 as there are three multiples of 2 in the array: 0, 22 and 6.

Try to use different values in your code to test. Also, please make sure the “count” value is

properly recorded in the data segment at the end of execution.

Total marks: 20.

User input X = 2

Three multiples of 2: 0, 22 and 6