代做Data communication and networking调试数据库编程

日期：2025-11-07 05:57

COURSE WORK ASSESSMENT LAB A Team G

MODULE :Data communication and networking

MODE: FULL TIME

OVERVIEW

In this assignment student will demonstrate their understanding of connecting end devices using HUB and SWTICH. UNDERTAND DATA COMMUNICATION using end devices

Assignment 1 – Lab   , Weighting: 10% of the module

Assignment – Lab1: Learn to use Packet Tracer

Instructions:

Preparation: Ensure you have read the lab script. You are required to register an account with cisco networking academy to access Packet Tracer software.

Objective 1:

· Develop an understand of the basic functions of Packet Tracer

· Create/model a simple ethernet network using 3 end devices(host) and a hub(use appropriate cable)

· Name the devices as given below. Configure IP address for the end devices

KretaPC – Ipv4 address – 10.2.1.1 and subnet mask-255.0.0.0

VinaPC– Ipv4 address – 10.2.1.2 and subnet mask-255.0.0.0

HRServer – Ipv4 address – 10.2.1.3 and subnet mask-255.0.0.0

· Goto command prompt from packet tracer and ping SamPc to DollyPc. Observe the result and snap the image (image1.jpg)

· Send data packet(PDUs) from KretaPC to VinaPC , Observe what happens.

· Observe status ,source , destination, and packet type. Write your observation in word file . Snap the complete screen image. Copy image(image2.jpg)  from packet tracer to word file.

In packet tracer, work both in real time mode and simulation mode

Objective 2:

· Create/model a simple ethernet network using 3 end devices(host) and a switch(use appropriate cable)

· Name the devices as KretaPC(PC0), VinaPC(PC2) and HRServer(PC2) Configure IP address for the end devices

KretaPC– Ipv4 address – 10.2.1.1 and subnet mask-255.0.0.0

VinaPC – Ipv4 address – 10.2.1.2 and subnet mask-255.0.0.0

HRServer – Ipv4 address – 10.2.1.3 and subnet mask-255.0.0.0

· Goto command prompt from packet tracer and ping PC0 to PC1/PC2. Observe the result and snap the image (image3.jpg)

· Send data packet(PDUs) from KretaPC to VinaPC in real time mode , observe what happens.

· Run in simulation mode , Stop the simulation when the  packet stationed at Switch.

· Observe status ,source , destination, and packet type. Write your observation in word file with explanation . Snap the complete screen image. Copy image(image4.jpg)  from packet tracer to word file.

In packet tracer, work both in real time mode and simulation mode

Note: Appropriate Labelling of end devices is compulsory to ensure complete marks. Image 2 and Image 4 to be snipped from simulation mode

Lab submission to Blackboard:

Reflection of your work , submit a word file(studentname-LabA.docx) which includes:

Objective1 observation and applicable image  -4 Marks

Objective2 observation and applicable image –4 marks

Conclude the document with what you learnt , which portion easy and which one challenging– 2 marks