代写CIT 593、代写C/C++程序语言

日期：2022-12-03 11:59

CIT 593 | Assignment: Dynamic Memory & File I/O | 1

Setting up Codio for this HW:

1) Open the Codio assignment via Coursera

2) From the Codio File-Tree click on: lc4_memory.h and lc4_memory.c

3) Remember to use the Codio “Pre-submission tests” function before submitting the

assignment.

Overview:

The goal of this HW is for you to write a program that can open and read in a .OBJ file created

by PennSim, parse it, and load it into a linked list that will represent the LC4’s program and data

memories (similar to what PennSim’s “loader” does). In the last HW, you created a .OBJ file. In

this HW, you will be able to read in a .OBJ file and convert it back to the assembly it came from!

This is known as reverse assembling (sometimes a disassembler).

RECALL: OBJECT FILE FORMAT

The following is the format for the binary .OBJ files created by PennSim from your .ASM files. It

represents the contents of memory (both program and data) for your assembled LC-4 Assembly

programs. In a .OBJ file, there are 3 basic sections indicated by 3 header “types” = CODE, DATA,

SYMBOL.

● Code: 3-word header (xCADE,

, ), n-word body comprising the instructions.

This corresponds to the .CODE directive in assembly.

● Data: 3-word header (xDADA,

, ), n-word body comprising the initial data

values. This corresponds to the .DATA directive in assembly.

● Symbol: 3-word header (xC3B7,

, ), n-character body comprising the

symbol string. Note, each character in the file is 1 byte, not 2. There is no null

terminator. Each symbol is its own section. These are generated when you create labels

(such as “END”) in assembly.

LINKED LIST NODE STRUCTURE:

In the file: lc4_memory.h, you’ll see the following structure defined:

The structure is meant to model a row of the LC4’s memory: a 16-bit address, & its 16-bit

contents. As you know, an address may also have a label associated with it. You will also recall

that PennSim always shows the contents of memory in its “assembly” form. So PennSim

reverse-assembles the contents and displays the assembly instruction itself (instead of the

binary contents).

CIT 593 | Assignment: Dynamic Memory & File I/O | 2

As part of this assignment, you will read in a .OBJ file and store each instruction in a NODE of

the type above. Since they’ll be an unknown # of instructions in the file, you’ll create a linked

list of the nodes above to hold all the instructions that are in the .OBJ file.

The details of how to implement all of this will be discussed in the sections of this document

that follow.

CIT 593 | Assignment: Dynamic Memory & File I/O | 3

FLOW CHART: Overview of Program Operation

CIT 593 | Assignment: Dynamic Memory & File I/O | 4

IMPLEMENTATION DETAILS:

The first files to view in the helper file are lc4_memory.h and lc4_memory.c. In these files you

will notice the structure that represents a row_of_memory as referenced above (see the

section: LINKED_LIST_NODE_STRUCTURE above for the node’s layout). You will also see several

helper functions that will serve to manage a linked list of “rows_of_memory” nodes. Your job

will be to implement these simple linked list helper functions using your knowledge from the

last HW assignment. You must implement everything listed by the comments in the starter

code.

Next, you will modify the file called: lc4.c It serves as the “main” for the entire program. The

head of the linked list must be stored in main(), you will see in the provided lc4.c file a pointer

named: memory will do just that. Main() will then extract the name of the .OBJ file the user has

passed in when they ran your program from the argv[] parameter passed in from the user.

Upon parsing that, it will call lc4_loader.c’s open_file() and hold a pointer to the open file. It will

then call lc4_loader.c’s parse_file() to interpret the .OBJ file the user wishes to have your

program process. Lastly it will reverse assemble the file, print the linked list, and finally delete it

when the program ends. These functions are described in greater detail below. The order of

the function calls and their purpose is shown in comments in the lc4.c file that you will

implement as part of this assignment.

Once you have properly implemented lc4.c and have it accept input from the command line, a

user should be able to run your program as follows:

./lc4 my_file.obj

Where “my_file.obj” can be replaced with any file name the user desires as long as it is a valid

.OBJ file that was created by PennSim. If no file is passed in, your program should generate an

error telling the user what went wrong, like this:

error1: usage: ./lc4

There is no need to check that the filename ends in .obj nor should you append .obj to filename

passed in without an extension.

CIT 593 | Assignment: Dynamic Memory & File I/O | 5

Problem 1) Implementing the LC4 Loader

Most of the work of your program will take place in the file: called: lc4_loader.c. In this file, you

will start by implementing the function: open_file() to take in the name of the file the user of

your program has specified on the command line (see lc4_loader.h for the definition of

open_file()). If the file exists, the function should return a handle to that open file, otherwise a

NULL should be returned.

Also in lc4_loader.c, you will implement a second function: parse_file() that will read in and

parse the contents of the open .OBJ file as well as populate the linked_list as it reads the .OBJ

file. The format of the .OBJ input file has been in lecture, but its layout has been reprinted

above (see section: OBJECT_FILE_FORMAT). As shown in the flowchart above, have the function

read in the 3-word header from the file. You’ll notice that all of the LC4 .OBJ file headers consist

of 3 fields: header type,

, . As you read in the first header in the file, store the

address field and the field into local variables. Then determine the type of header you have

read in: CODE/DATA/SYMBOL.

If you have read in a CODE header in the .OBJ file, from the file format for a .OBJ file, you’ll

recall the body of the CODE section is -words long. As an example, see the hex listed below,

this is a sample CODE section, notice the field we should correlate with n=0x000C, or decimal:

12. This indicates that the next 12-words in the .OBJ file are in fact 12 LC-4 instructions. Recall

each instruction in LC4 is 1 word long.

CA DE 00 00 00 0C 90 00 D1 40 92 00 94 0A 25 00 0C 0C 66 00 48

01 72 00 10 21 14 BF 0F F8

From the example above, we see that the first LC-4 instruction in the 12-word body is: 9000.

(that happens to be a CONST assembly instruction if you convert to binary). Allocate memory

for a new node in your linked list to correspond to the first instruction (the section above:

LINKED LIST NODE STRUCTURE, declares a structure that will serve as a blue-print for all your

linked list nodes called: “row_of_memory”). As it is the first instruction in the body, and the

address has been listed as 0000, you would populate the row_of_memory structure as follows.

address 0000

label NULL

contents 9000

assembly NULL

next NULL

CIT 593 | Assignment: Dynamic Memory & File I/O | 6

In a loop, read in the remaining instructions from the .OBJ file; allocate memory for a

corresponding row_of_memory node for each instruction. As you create each

row_of_memory add these nodes to your linked list, ordering the list by address (you should

use the functions you’ve created in lc4_memory.c to help you with this). For the first 3

instructions listed in the sample above, your linked list would look like this:

The procedure for reading in the DATA sections would be identical to reading in the CODE

sections. These would become part of the same linked list, as we remember PROGRAM and

DATA are all in one “memory” on the LC-4, they just have different addresses.

For the following SYMBOL header/body:

C3 B7 00 00 00 04 49 4E 49 54

The address field is: 0x0000. The symbol field itself is: 0x0004 bytes long. The next 4 bytes:49

4E 49 54 are ASCII for: INIT. This means that the label for address: 0000 is INIT. Your

program must search the linked list: memory, find the appropriate address that this label is

referring to and populate the “label” field for the node. Note: the field: tells us exactly how

much memory to malloc() to hold the string, however you must add a byte to hold the NULL. 5

bytes in the case of: INIT. For the example above, the node: 0000 in your linked list, would be

updated as follows:

address 0000

label INIT

contents 9000

assembly NULL

next

It might be that you come across a label for an address that has not yet been created in your

linked list. In this case create a new node and add the label. The other node fields can be left

blank. They will be eventually updated. It is possible that an address has two labels in the .OBJ

file. In this case make sure to use the last one that occurs.

CIT 593 | Assignment: Dynamic Memory & File I/O | 7

Once you have read the entire file; created and added the corresponding nodes to your linked

list by address order, close the file and return to main(). If you encounter an error in closing the

file, before exiting, print an error, but also free() all the memory associated with the linked list

prior to exiting the program.

The feof() function may not work the way you think it should. The eof indicator only returns

true AFTER you have attempted to read past the end of the file. If the file position is right at the

end of the file but you haven’t tried to read past the end of the file yet, feof() will be false. This

means that you need to check all of your calls to fread() or fgetc() to make sure they didn’t hit

the end of the file.

CIT 593 | Assignment: Dynamic Memory & File I/O | 8

Problem 2) Implementing the Reverse Assembler

In a new file: lc4_disassembler.c: write a third function (reverse_assemble) that will take as

input the populated “memory” linked list (that parse_file() populated) – it will now contain the

.OBJ’s contents. reverse_assemble() must translate the hex representation of some of the

instructions in the LC4 memory’s linked list into their assembly equivalent. You will need to

reference the LC4’s ISA to author this function. To simplify this problem a little, you DO NOT

need to translate every single HEX instruction into its assembly equivalent. Only translate

instructions with the OPCODE: 0001 (ADD REG, MUL, SUB, DIV, ADD IMM). The immediate value

can be formatted with #, x, X, and/or nothing (e.g. ADD R1, R1, #10 == ADD R1, R1, xF == ADD

R1, R1, 10).

Data stored at an address in the DATA section should not be translated to an assembly

instruction

As shown in the flowchart, this function will call your linked list’s “search_opcode()” helper

function. Your search_opcode() function should take as input a 4-bit opcode and return the first

node in the linked list that matches the opcode passed in, but also has a NULL assembly field.

The opcode that is passed into search_opcode() is a number between 0 and 15 (0x0 and 0xf).

The opcode in the instruction is in the leftmost bits of the instruction. For example, here’s the

definition of an ADD instruction from the ISA:

0001 ddds ss00 0ttt

but the opcode in the opcode parameter passed to search_opcode() will be:

0000 0000 0000 0001

when looking for an instruction with opcode 1. So you will need to use the C-bitwise operators

to line these two values up before comparing them.

search_opcode() is meant to find the first instruction in the linked list where these two 4-bit

fields match. There is an additional constraint that memory rows that already have the

assembly instruction (reverse assembled) filled in don't count as a match.

Said another way, find the first instruction in memory with a matching opcode that hasn't

already been reverse assembled.

When/if a node in your linked list is returned, you’ll need to examine the “contents” field of the

node and translate the instruction into its assembly equivalent. Once you have translated the

contents filed into its ASCII Assembly equivalent, allocate memory for and store this as string in

the “assembly’ field of the node. Repeat this process until all the nodes in the linked list with an

OPCODE=0001 have their assembly fields properly translated.

As an example, the figure below shows a node on your list that has been “found” and returned

when the search_opcode() function was called. From the contents field, we can see that the

HEX code: 128B is 0001 001 010 001 011 in binary. From the ISA, we realize the sub-opcode

reveals that this is actually a MULTIPLY instruction. We can then generate the string MUL R1,

CIT 593 | Assignment: Dynamic Memory & File I/O | 9

R2, R3 and store it back in the node in the assembly field. For this work, I strongly encourage

you to investigate the switch() statement in C (any good book on C will help you understand

how this works and why it is more practical than multiple if/else/else/else statements). I also

remind you that you must allocate memory strings before calling strcpy()!

CIT 593 | Assignment: Dynamic Memory & File I/O | 10

You will find that using C bitwise operators will greatly simplify your implementation. See

https://www.tutorialspoint.com/cprogramming/c_bitwise_operators.htm for details.

Problem 3) Putting it all together

As you may have realized, main() should do only 3 things: 1) create and hold the pointer to your

memory linked list. 2) Call the parsing function in lc4_loader.c. 3) Call the disassembling

function in lc4_dissassembler.c. One last thing to do in main() is to call a function to print the

contents of your linked list to the screen. Call the print_list() function In lc4_memory.c; you will

need to implement the printing helper function to display the contents of your lc4’s memory list

like this:

INIT 0000 9000

0001 D140

0002 9200

…

0009 128B MUL R1, R2, R3

END 000A 0

(and so on…)

Notice that

and fields are displayed in hexadecimal with leading zeroes.

Please remove all debugging print statements before submitting. Only the memory list should

be printed. If the contents of a node are NULL, they should display as 0.

1. You can print (null) for label and assembly instructions when none exist, or leave them

blank.

2. There may be very long labels, so that the other entries in that row are pushed to the

right. That is fine.

3. You may find the formatting strings “%-20.04x” and “%-20s” useful in keeping your

output aligned. This isn’t critical but it is definitely easier to read.

Several things to note: There can be multiple CODE/DATA/SYMBOL sections in one .OBJ file. If

there is more than one CODE section in a file, there is no guarantee that they are in order in

terms of the address. In the file shown above, the CODE section starting at address 0000, came

before the CODE section starting at address: 0010; there is no guarantee that this will always

happen, your code must be able to handle that variation. Also, SYMBOL sections can come

before CODE sections! What all of this means is that before one creates/allocates memory for a

new node in the memory list, one should “search” the list to make certain it does not already

exist. If it exists, update it, if not, create it and add it to the list!

CIT 593 | Assignment: Dynamic Memory & File I/O | 11

Prior to exiting your program, you must properly “free” any memory that you allocated. We will

be using a memory checking program known as valgrind to ensure your code properly releases

all memory allocated on the heap! Simply run your program: lc4 as follows:

valgrind –-leak-check=full ./lc4 test1.obj

where test1.obj is the name of the .obj file you want to test with.

The following section is in bold and red for a reason. Please make sure you fully understand

it!

Valgrind should report 0 errors AND there should be no memory leaks

and no accessing uninitialized memory locations prior to submission.

Note: we will run Valgrind on your submission, if it returns errors, you

will lose points on this assignment. So watch the VIDEO, learn how to

use Valgrind!!

Also note: If your code doesn’t compile or even run, you will lose most

of the points of this assignment!

Valgrind will find errors related to accessing uninitialized memory

locations. This typically results from assuming that malloc() zeroes out

the memory it returns. It does NOT. It can also happen when you

access memory locations in an array or string beyond the end of the

array or string. While your program may run correctly on your test

cases when you have these errors, the results are unpredictable and

may cause the test cases run by the autograder to fail.

TESTING YOUR CODE

When writing such a large program, it is a good strategy to “unit test.” This means, as you

create a small bit of working code, compile it and create a simple test for it. As an example,

once you create your very first function: add_to_list(), write a simple “main()” and test it out.

Call it, print out your “test” list, see if this function even works. Run Valgrind on the code, see if

it leaks memory or accesses uninitialized memory locations. Once you are certain it works, and

doesn’t leak memory, go on to the next function: “search_address()”; implement that, test it

out.

CIT 593 | Assignment: Dynamic Memory & File I/O | 12

DO NOT write the entire program, compile it, and then start testing it. You will never resolve all

of your errors this way. You need to unit test your program as you go along or it will be

impossible to debug.

Remember to use the Codio “Pre-submission tests” function before submitting the

assignment.

Where to get input files?

In the last assignment, you created a .OBJ file. Try loading that file into Codio, and use your

program on it. You know exactly how that program should disassemble. To test further, bring

up PennSim, write a simple program in it, output a .OBJ from PennSim, then read into your

program and see if you can disassemble it. You can create a bunch of test cases very easily with

PennSim.

You should test your lc4 program on a variety of .OBJ file, not just simple examples. A selection

of .OBJ files has been provided in the “obj files for student testing” folder in codio.

Using gdb to debug your program is also HIGHLY recommended.

CIT 593 | Assignment: Dynamic Memory & File I/O | 13

STRUCTURING YOUR CODE:

Preloaded in Codio, you’ll find the files named below that you must implement.

lc4.c - must contain your main() function.

lc4_memory.c - must contain your linked list helper functions.

lc4_memory.h - must contain the declaration of your row_of_memory

structure & linked list helper functions

lc4_loader.h - contains your loader function declarations.

lc4_loader.c - must contain your .OBJ parsing function.

lc4_disasembler.h - contains your disassembler function declarations.

lc4_disasembler.c - must contain your disassembling function.

Makefile - must contain the targets:

lc4_memory.o

lc4_loader.o

lc4_disassembler.o

lc4

All, clean and clobber

You cannot alter any of the existing functions in the .h files.

EXTRA CREDIT: A complete reverse assembler:

Finish the disassembler to translate any/all instructions in the ISA. Have your program print the

linked list to the screen still, but also create a new output file: .asm. If it works,

we should be able to assemble it in PennSim, load the .OBJ file into PennSim and have the

memory in PennSim look the same as when we load the test case .OBJ file. Don’t forget to

add in the directives (.CODE, .DATA)…the ultimate test of your program will be getting it to

assemble using PennSim and produce the same results as the provided .OBJ file.

If you do implement the extra credit, please make sure NOT to output assembly directives for

opcodes other than 1 in print_list(). Instead leave the assembly directive column blank or

(null) for the other opcodes. The assembly directives for the extra credit opcodes should still

appear in the .asm file you generate. Said another way, the output from your program should

look like the example above:

0002 9200

not:

0002 9200 CONST R2, 0

● Don't forget to add directives, labels etc.

● Partial Credit is possible as we will run the program against multiple .obj files. No partial

credit is available for just reverse assembling the instructions and NOT producing a .ASM

file. You MUST produce the .asm file to get any credit.

● The different Registers in assembly instruction should be separate by comma, e.g. ADD

R1, R2, R3

CIT 593 | Assignment: Dynamic Memory & File I/O | 14

● When creating the .asm file, you should change the last 3 characters of the filename

(argv[1]) from .obj to .asm.

● The EC is worth 15 points (out of 100) so the highest grade on the assignment is 115%

Extra Credit Testing Tips

You should be able to assemble your asm file with the PennSim ‘as’ command and then load

it back to PennSim with the PennSim ‘ld’ command. The PennSim memory should be the

same as when loading the test obj file.

Note that your obj file does not need to be identical to the provided test obj file. The blocks

can appear in a different order. As long as they both produce the same PennSim memory

contents you will receive credit

Remember the ‘as’ command will overwrite the provided test obj file unless you give it

a different name. You can always copy the original obj file back to the submit forlder

if you overwrite it by mistake. This is the main reason we put the test cases in a separate

folder

●

●

●

CIT 593 | Assignment: Dynamic Memory & File I/O | 15

Key Requirements:

o Your code must compile and run, Valgrind should report 0 errors and there should be no

memory leaks prior to submission.

o lc4.c and lc4_memory.c

Function requirements explicitly laid out in starter code – implement everything

specified by the comments as these are instructions as well. A copy of the starter

functions is provided below in case of deletion

o lc4_loader.c

open_file(): read in a string file_name; if the file exists, open it and return a pointer

to the open file, otherwise return NULL

parse_file():

● take in an open file src_file and your linked list memory

● in a loop, read in and parse the ,

, and to determine

the type of header to appropriately allocate room for and populate a new

row_of_memory, and add that node to your linked list using the functions in

lc4_memory.c, ordering the memory by address

● once entire file is read, and you’ve created and added the corresponding

nodes to your linked list in address order, close the file and return to main()

o lc4_disassembler.c

reverse_assemble()

● take in your populated linked list memory

● Find every row_of_memory in your linked list with the OPCODE 0001 (ADD,

MUL, SUB, DIV, ADD IMM), utilizing lc4_memory’s search_opcode() function

● For these nodes, translate the HEX instruction (contents) into its assembly

equivalent and update the assembly field of the node

Important Note on Plagiarism:

o We will scan your HW files for plagiarism using an automatic plagiarism detection tool.

o If you are unaware of the plagiarism policy, make certain to check the syllabus to see the

possible repercussions of submitting plagiarized work (or letting someone submit yours).

CIT 593 | Assignment: Dynamic Memory & File I/O | 16

Hints from earlier semesters:

● Checking end of file. Have a look at:

https://faq.cprogramming.com/cgi-bin/smartfaq.cgi?id=1043284351&answer=1046476070

● You can assume that the maximum length of an assembly instruction is 100, the maximum length

of a label is 100 and the maximum length of a filename is 100.

● Helper Functions are fine. Do not change the headers of the predefined functions and

remember to “#include ” in your .h files if your helper functions require

definitions from stdio.h

● Do not use externs or global variables.

● The “hexdump -C” command displays an .OBJ file one byte at a time rather than one

word at a time. The first column displayed by hexdump is the byte offset.

● You do not have to check that the addresses in the .OBJ file are valid but feel free to

check if you like

● The order of the steps in the flow chart provide guidance to help you but you can opt for

a different order, as long as your program works.

● There are several possible errors: the input file can't be found, the input file isn't validly

formatted, malloc can't find sufficient memory, etc. It is a best practice to print an error

message and exit if any of those things happen but the autograder will not be testing

those sort of edge cases.

● While we want your program to have no memory leaks, it is more important that your

program actually runs.

● Make sure all of your loops that traverse the memory list look at the first and last

element of the memory list. This is a VERY common mistake.

● Q. Do we need to be able to handle OBJ that is both big and small endianness or will it

be standardized?

A. You should handle the OBJ files that PennSim produces

● valgrind documentation available at

https://www.valgrind.org/docs/manual/quick-start.html#quick-start.interpret

● add_to_list() should keep the memory list in sorted order by address. CODE vs. DATA

isn't relevant.

● Q. Will memory locations in input files only be in user code and data space, or could

they be in OS memory?

A. They could be in OS memory as you will see in some of the sample OBJ files provided.

● Q. i am wondering why is the int add_to_list method has a double-pointer of

"row_of_memory** head"? Can I delete one of the stars?

A. No, the double pointer is required.

It is because when we add nodes to our linked-list, we want to be able to change the

head pointer. Because we pass in a double pointer, we can change what memory (in

parse_file) points to, thus allowing us to change the head pointer and add nodes to the

beginning of our linked-list. Otherwise, we would just be creating a local copy of the new

linked-list non-accessible by main().

● you are allowed to use the standard library of string.h.

● add_to_list - /* check to see if there is already an entry for this address and update the

contents, if so */

This step is asking you to look through memory and see if the address is already

there. If the address is already present in the memory list, replace the

CIT 593 | Assignment: Dynamic Memory & File I/O | 17

"contents" with the new "contents". The alternative, which doesn't make sense,

would be to create a new entry in the memory list with the same address.

● We will make sure that only files with .obj extensions are passed as arguments to ./lc4

● The x86 (the processor used by Codio) has a different endianness than the LC4. When

doing fread()'s of 2 byte words, swapping occurs to adjust for this. That same swapping

doesn't occur with the fgetc() or fread()'s with size 1.

● Segmentation faults demystified

Segmentation faults are VERY common failures in C programs. They can be hard to pin

down

First we should understand why they happen.

Segmentation faults are a common class of error in programs written in languages like C

that provide low-level memory access. They arise primarily due to errors in use of

pointers for memory addressing, particularly illegal access. There are two common

cases:

1. trying to dereference a NULL pointer. This often happens when calling a

function that returns a pointer or NULL in case of error. If you don't check the

return value from the function and then proceed to dereference the pointer, you

will get a segmentation fault.

2. an incorrect assumption that memory on the stack (and heap) is initialized to

zero. This is NOT the case. If you want the memory to be initialized to zero, you

need to do this explicitly, possibly using the memset() function. You might have

code that checks to see if the memory is 0 or NULL and then take some action

based on this. If the memory is not initialized to zero, it will have random,

unpredictable contents. This is often referred to as (X) or "don't care" in the

lectures.

So, how do you figure out where the segmentation fault is occurring? The simplest way

to find out is using gdb. After compiling using the "-g" clang switch and running the

program, remembering the procedure for running a program in gdb that takes a

command line arguments (the gdb commands “start” and “run” allow you to specify the

command line arguments), you will get the segmentation fault. You can then use the gdb

"where" command which will tell you the line number in your program where the failure

occurs.

For example:

gdb ./lc4

start test1.obj

runs gdb on your lc4 program and starts it with argv[1] set to test1.obj